iQe CS027 User Instructions Download Page 24 | Manualshive

Page: 24 / 24

iQe CS027 User Instructions Download Page 24

Stage 1 – The battery low symbol will appear in the display

Stage 2 – The words 'Low Battery' will appear in the display for 1
second each time a button is operated

Stage 3 – The unit will switch itself OFF and the message
'Replace Batteries' will appear permanently in the display.

The batteries should be changed at Stage 2 at the latest.

To replace the batteries of the CS027, please carefully pull down
the hinged battery cover on the front of the unit. Ensure they are
fitted correctly as indicated by the terminal markings in the
battery compartment.

Please dispose the old batteries responsibly

SERVICE AND REPAIR

This  programmer  is  NOT  user  serviceable.  Please  do  not
dismantle  the  unit.  In  the  unlikely  event  of  a  fault  developing
please refer to the RESETTING THE CS027 on page 23.  If this
fails  to  resolve  the  problem  please  contact  a  local  heating
engineer or a qualified electrician.

24

www.iQE.co.uk
Trade House BA22 8RT

Part Number P85553 Issue 2

«
...
22
23
24

Summary of Contents for CS027

























Reviews:

No comments