10
4. Installation
The IQC1920S2 is designed to be wall mounted using the cable managed bracket
supplied. To install the camera, please follow the steps below.
1. Remove the bracket from the main
camera body by taking off the screws
using a cross head screw driver.
2. Using the bracket as a stencil, mark
out the drill holes needed in the wall.
3. If feeding wires through the wall you
will need to drill a hole through the wall
for the wires to go. However, if placing
through the bracket, you can just feed
through the side.
4. Drill the holes in the wall where you
have made the marks. Insert wall plugs
here if required.