3.2 How to assemble the DVT touch frame with the whiteboard
When the size of the whiteboard is larger than that of DVT touch frame, plz screw the brackets both on the frame and
whiteboard, as shown in the pic below. Ensure the distance between fixed brackets is the same as well.
Method1:
When the size of the whiteboard is the same as that of the DVT touch frame, plz screw two brackets at two sides and fix
the frame with whiteboard tight. Ensure the distance between fixed brackets is the same, as shown in the pic below.
Method2:
Make sure that the frame is placed horizontally during the installation.
The length and width of the specified board each should be 30mm wider than the frame.
Requirements
of specified board: Surface roughness ≤2mm.
Note:
4
