Page 9
Cutting Round Openings into Panels with Hole Cutting Tool
9.
Seal the gap between the collar and the front of the panel using
duct sealant. Wait until it has dried. Water-based low VOC is
recommended, such as DP 1010.
10.
Put the insulation to the inner side of the panel and fix the
insulation to the collar with a duct tape.
11.
Stick the tape tightly to the insulation. Slice or notch the tape
to secure it smoothly to a round opening.
12.
Attach the connection panel again to the Perfect 16 system,
using the supplied TX30 Stainless Steel Screws. The screws are
included with the panel.
13.
Repeat for second duct connection panel.
14.
Dispose and recycle waste per local laws and regulations.
Summary of Contents for ID-2225
Page 15: ...Page 15 Notes...