24
Chapter 6 – Replacing Filters
6. With the palm of the hand, press down on
the filter and loosen the frame.
5. Turn the frame upside down.
4. Remove the filter clamps that secure the
filter in the frame, by pulling these out of
the sliding grooves.
TOP
TOP
T
TOP
TOP
9. Turn the frame around and insert the
new filter. Ensure that the arrows on the
filter label point upward.
11. Put the frame back into the housing. For
details on how to close the housing,
please refer to the section 6.3.
8. Dispose of the used filter by placing it
into the plastic bag in which the new
filter is supplied.*
7. Lift the frame from the filter.
10. Make sure that the filter is inserted all the
way into the frame. Insert the clamps into
the sliding grooves inside the frame and
push them down.
* If harmful substances are filtered,
disposal of the used filters may be subject
to local regulations or laws.
Important: After a filter has been replaced,
the filter life monitor must be reset (see
section 4.4.8).
All manuals and user guides at all-guides.com
