9
Step 3:
Remove the old filter by pulling on the tabs
and then dispose of it. Replace with a new IQAir
Atem HyperHEPA
®
filter (6) and firmly press into
place.
Step 4:
Put the back cover on and gently rotate until
the lock pins align into place. Grasp firmly and press
down on the locking ring and turn clockwise to lock.
The back cover should now be closed securely.
Attach the air purifier to the stand for use.
PureJet Diffuser
To remove your PureJet diffuser, firmly grasp the air
purifier and pull off the diffuser.
To attach your PureJet diffuser firmly grasp the air
purifier and align the large pins on the diffuser with
the arrows on the outlet vent. Note the outlet vent
has larger openings.
Once the diffuser pins
are aligned with the vent
arrows press firmly into
place while holding the
air purifier.
Should the PureJet
diffuser grille become
dislodged, align the
hook at the bottom of
the diffuser grille with the
bottom of the diffuser
body and snap firmly into
place.
Product Use and Operation
Lift tabs to remove filter
Turn clockwise to lock
Removal of the diffuser
Locate outlet vent arrows
Align the large pins with
the arrows
Connector hook
Diffuser grille snaps into place
EN
