IQ Touch L Series, User Manual

Page: 3 / 19

3
Charter1: Notice
Thanks for purchasing our IQ product. This product has been tested before shipping, but
incorrect using may lead to fire hazard. For safety, please read these instructions
completely before using the equipment.
- Be strictly adhered to all instructions when operating the product, which has dangerous
high voltage inside the product.
-
Only use attachments/accessories specified by the manufacturer.
Safety Instructions:
- Protect the power cord from being tread upon or pinched otherwise it may cause hazard.
- Please keep your hands dry when unplug the power cord from the outlet.
- Keep the device away from over-heated, over-cooled or damp environment, and don’t
place the device under direct sunshine.
- Holes on the casing are designed for ventilation and heat dissipation. To gain fully
ventilation, please always keep at least 10cm clearance between the wall and equipment.
- Please do not install the product in embedded facility unless there is good ventilated
device.
-
Please place this product on flat ground to
prevent from falling and damaging.
- Operate your device only from the type of power source indicated on the marking label.
This device only works for AC 100-240V.
- Do not overload power outlets and extension cords because this can result in a risk of
fi
re or electric shock.
-
Unplug this device from the power outlet and ask qualified technician under the
following conditions:
• The power cord is damaged or abrasion.
• Fall from high place or case damage.
• Stu
ff
or liquid fall into the machine.
• Unusual sound, smell etc.
•Abnormal phenomenon during using. Machine fails to work after operating by instruction.
- Replacement parts
When replacement parts are required, make sure that the replacement parts specified by
the manufacturer that have the same characteristics with previous one.
- Transit
When a cart is used for product transit, please pay attention to protect the screen panel.
Avoid damage from falling down caused by over-brake and over-force.