5
3). Insert the expansion rubber plug into the hole that has been punched, and then fix the fixed bracket
B to the wall with the self-tapping screws in the accessory box;
4). Hang IQAio directly on fixed bracket B and
then adjust projection position;
5). After confirming the projection position,
according to position of the bottom mounting
bracket C to mark in the long waist hole of fixed
bracket C on the wall;
6). Remove IQAio and unscrew the screws of
fixed bracket C. Take off the fixed bracket C and
save the removed four pieces M4 * 12 round head
screws with gasket.
7). After confirming the position of the fixed bracket C, use an 8mm electric drill to drill 4 fixed holes
deeper than 70mm on the installation wall;
8). Insert the expansion rubber plug into the hole that has been punched, and then fix the fixed bracket
C on the wall with the self-tapping screws in the accessory box;
