iQ Pet no bark, Owner'S Manual

Page: 6 / 8

- 5 -
REPLACING THE BATTERIES
PROPER FIT
TROUBLESHOOTING
- Using a coin, unscrew the battery cover
counterclockwise.
- Insert two batteries with the plus sides
facing out.
- Check to make sure that the rubber
gasket is in place, and screw in the
battery cover clockwise.
A proper fit is necessary for the iQ
No Bark Collar to work optimally.
Both contact points must be in contact
with your dog’s skin at all times for a
consistent stimulation. A loose fitting
collar can cause the contact points to rub
against the skin and cause irritation.
* ATTENTION
- When the batteries are placed incorrectly, the LED indicator light may
turn on, but the unit will not operate properly.
- The unit is working properly when the LED Battery life indicator blinks
once. When the LED Battery life indicator blinks twice consecutively, the
battery will need to be replaced.
- Please remove the plastic battery seals before installing the batteries.
1. When do I replace the batteries on my iQ No Bark Collar?
- If the unit is not activating or the LED indicator does not turn on, the
batteries may need to be replaced. Overall battery life will be dependent
on usage. With the iQ No Bark Collar activating around 10 times a day,
the battery will have an average life of about 2-weeks.
- To clean the iQ No Bark Collar, make sure the battery cover is closed
and fully sealed, and wipe down the unit with a damp cloth and some
alcohol. Make sure the unit is completely dry before use.
2. My dog is not reacting to the iQ No Bark Collar.
- Check the LED indicator light to see that the iQ No Bark Collar has