3
Installation
12v DC Input
Power Cable
BNC
Video Cable
1. Select a suitable position on the wall or ceiling to install the camera and
map out the holes for the bracket.
2. Drill a hole in the middle of area on the wall or ceiling where the
camera is to be mounted, to allow the power and video cable to be fed
through. Alternatively, the cable can be surface mounted by taking the
cabling out through the side of the bracket.
3. Screw the bracket base to the wall or ceiling using the Wall Plugs and
screws supplied.
4. To change the bracket position during installation, the different screws
on the bracket can be adjusted as shown in the diagram (A-D)
5. Connect the power terminal of the camera to a 12V DC regulated power
supply. Connect the camera video output and the video input on the
control or viewing equipment with RG59 (BNC) video signal cable.