- 43 -
4.8.3 Event Configuration >> Motion Detect Trigger
Motion Detect Trigger:
Select the
Enable
option to enable
the trigger function of the camera, so that you can send
captured images within the detecting area to the FTP server,
email receiver, or the Network Storage server. You have to
configure corresponding settings, such as FTP server and
email server, to enable this feature. Please note that you
have to configure the related settings before enabling these
features.
-
Schedule Profile:
Select a schedule profile from the pull-
down list.
-
Action:
Set the
Trigger Out
function or select the
destination that the captured images will be sent to: , or
Record to SD Card
,
Record to Network Storage
,
Send
,
FTP Upload
, or
Instant Message
.
4.8.4 Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function
of the camera by
,
FTP
, or
Network Storage
. Select the
Enable
option on each item, and then select a
Schedule
Profile
from the pull-down list and set the
Interval
time.
NOTE
If the setting value of the
Network Storage Recording
Time Per Event
option in General Setting is longer
than the
Interval
time in Network Storage Schedule,
the recorded file will be a continuous video clip.
For example, if you set the
Network Storage
Recording Time Per Event
as 10 seconds and the
Interval
as 5 seconds, recorded file becomes a non-
stop video clip because the camera will record a 10-
second video clip every 5 seconds.
