- 15 -
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP address of
your computer. When you connect the camera to your computer directly
to proceed with configuration of the camera, you need to set up the IP
addresses to be in the same segment for the two devices to
communicate.
1.
On your computer, click
Start > Control Panel
to open the Control
Panel window.
2.
Double-click
Network Connection
to open the Network Connection
window.
3.
Right-click
Local Area Connection
and then click
Properties
from
the shortcut menu.
4.
When the Local Area Connection Properties window appears, select
the
General
tab.
5.
Select
Internet Protocol [TCP/IP]
and then click
Properties
to bring
up the Internet Protocol [TCP/IP] Properties window.
6.
To configure a fixed IP address that is within the segment of the
camera, select the
Use the following IP address
option. Then, enter
an IP address into the empty field. The suggested IP address is
192.168.0.x
(
x
is 1~254 except 30), and the suggested Subnet mask is
255.255.255.0
.
7.
When you are finished, click
OK
.
