Product Description of BRT-F005-T
Page 4 of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
Control using wall mount unit:
There are four keypads on the front panel. Pressing each
keypad will turn on or turn off the fan or the lamp and change the fan speed.
LAMP:
Pressing once will turn on the lamp, and pressing again will turn off the lamp;
ON/OFF:
Pressing once will turn on the fan, and pressing again will turn off the fan;
SPEED+:
Each pressing will increase the fan speed; and
SPEED-:
Each pressing will decrease the fan speed.
There are 5 speed settings, I, II, III, IV, and V. The fan will start at the highest speed V for the first
time operation. Then, the memory function will enable the fan to always start at last speed.
Control using remote:
There are four buttons on the remote. Pressing each button will turn on
or turn off the fan, turn on or turn off the lamp, and change the fan speed.
LAMP:
Pressing once will turn on the lamp, and pressing again will turn off the lamp;
ON/OFF:
Pressing once will turn on the fan, and pressing again will turn off the fan;
+
:
Each pressing will increase the fan speed; and
-
:
Each pressing will decrease the fan speed.
Again, there are 5 speed settings, I, II, III, IV, and V. The fan will start at the highest speed V for
the first time operation. Then, the memory function will enable the fan to always start at last
speed.
Adjust the minimum speed:
There is a potentiometer for minimum speed adjustment on the
side of BRT-F005-T as shown in Fig. 6. Turn on the fan and run the fan at minimum speed. Then,
use a screw driver to adjust this potentiometer to obtain a minimum fan speed as desired.
Fig. 6
Adjust the minimum speed
