Product Description of BRT-320
Page 3 of 6
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
1.
Installation using a holder
As shown in Fig. 4, a holder is attached to the ceiling using screws first. Then, the PIR sensor
switch can be easily snapped into the holder.
The holder is specially designed for BRT-320 sensor switch. Please talk to our sales representative
when placing orders.
Fig. 4
Installation with a Holder
2.
Installation without a holder
As shown in Fig. 5, without a holder, an opening in the ceiling needs to be made first. There are
four steps:
Step one:
Open a hole of 68mm in diameter in the ceiling;
(Attach the electrical wires as shown in the Wiring Diagram Fig. 3).
Step two:
Open the two flexible clamps on the side surface of the sensor switch;
Step three: Insert the sensor switch into the hole; and
Step four:
The clamps will hold the sensor switch onto the ceiling tight and steady.
