Product Specifications of BRT-105
Page 3 of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
Wiring Diagram and Installation Guide:
BRT-105 timer switch requires both hot wire and neutral wire for installation:
Hot wire (ACL):
Coming from the power line with 220V;
Neutral wire (ACN):
Usually coming with the hot wire; and
Load wire:
Going to the load.
Fig. 4
BRT-105 Timer Switch Wiring Diagram
Warning:
Please make sure power is turned off before starting installation!
Fig. 4 shows the wiring diagram and Fig. 5 shows the step-by-step installation instructions. There
are three easy steps:
Step one:
Use a screwdriver to pry off the front plate in position A;
Step two:
Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install screws and front plate.
Fig. 5
BRT-105 Timer Switch Installation Guide
