19
The Boots Smooth Skin
PLUS
system can be
used to reduce the hair growth on the
neck where shirt collars rub and can lead
to soreness following shaving.
During use
Once activated, if the Boots Smooth Skin
PLUS
is not used for three minutes it will automatically
go into standby mode and all four of the
skin tone lights will flash every two seconds.
To continue using the Boots Smooth Skin
PLUS
simply press and hold the skin tone selector
button for three seconds and the unit will
revert to active mode. Always check the
correct skin tone is set before starting a new
treatment cycle.
Your Boots Smooth Skin
PLUS
system features
a SLEEP mode which operates after
approximately one hour of the unit being
in STANDBY mode. When this happens
the skin tone II light will flash every two
seconds indicating SLEEP mode. To return
the unit back into STANDBY mode press
and hold the selector button for three
seconds. Alternatively turn the product off
for a few seconds and then back on. The
Boots Smooth Skin
PLUS
system is now back
in STANDBY mode and all four lights will
flash every two seconds. To continue using
the Boots Smooth Skin
PLUS
system press and
hold the selector button for a further three
seconds to get into READY mode. Always
check the correct skin tone is set before
starting a new treatment cycle.
If the handset starts to feel uncomfortably
warm or hot against your skin during use,
stop using the Boots Smooth Skin
PLUS
, put
the unit back into STANDBY mode and
place the handset back into the cradle.
Leave the unit for at least 30 minutes to
cool down. Remember to check that you
have a thick layer of gel applied at all
times. If the problem persists stop using the
Boots Smooth Skin
PLUS
.
When your Boots Smooth Skin
PLUS
has less
than 500 pulses remaining the flashbulb
expiry light will flash. If the flash bulb
expiry light is on continuously your handset
has fired 20,000 flashes and your Boots
Smooth Skin
PLUS
must be returned for
a chargeable service or replaced.
