iPB4 Biometric Device Range
–
Installation & User Guide
–
Rev 07 ©2017-2018 iPulse Systems
13
SECTION 4
UNPACKING THE BOX
Thank you for purchasing an iPulse iPB4 Biometric device. Your iPB4 should be packaged neatly into a
sturdy and securely built box, clearly branded with the iPulse brand, and your device name.
When opening the box, you should find your biometric reader
and IntelliRelay™
securely packaged in a
high-density foam casing, which has been carefully selected to provide your product with maximum
protection during shipping. The front cover of the reader should be nestling on top of the actual reader.
Figure 3 - Box Interior
On the side of the box there will be a product serial number as well as a sticker to show the specific model
of the device you have purchased (
). This is important information & the serial
number on the box should correspond with the serial number on the unit inside the box.
If for any reason this is NOT the case, please report this immediately to the supplier who provided you
with your reader.
Figure 4 - Serial & Model
Summary of Contents for iPB4
Page 1: ......
