28
4
7
2
2
WATER LEVEL:
Here the water level has to be programmed.
to select :
No level
: no water inlet
Low level
: low level
High level
: high level
Overflow
: unlimited level
Overflow
cannot be selected if “
Pump
” was entered at “
DRAIN
” in configuration menu.
Remark :
press
press
❺
Time is programmable for
900
seconds maximum, but is limited by the value entered at
“TIME”
.
This can be programmed from
1 to 30
per second, from
31 to 180
per 2 seconds, from
180 to 900
per
5 seconds.
press
type
Liquid soap injection
If you have selected some reservoirs of the soapbox (see page 14) for soap injection (yellow colour)
you can now can enter the number of seconds during witch there has to be soap injected in the tub
❺
press
æ
a white text block appears.
the number of seconds that soap has to be injected.
to confirm
type
the number of water inlets that have to be avtivated. The following example
will explain this function.
to remove
“I2”
press
to select
" I2 "
and
" 7 "
(water recovery)
Example :
If another than this preferential programmation is required, it can be changed.
❺
