16
4
Function F1 (Time stop)
During the wash cycle:
The
wash time is stopped
. The temperature, water level and wash action
remain
the same as programmed
.
During the wash cycle, this function remains active until the
START button
(S) is pressed again
.
During intermediate spin :
The intermediate spin normally lasts 1 minute.
By activating function F1, the machine will spin for
nine minutes
unless the
START button (S) is pressed earlier.
During fi nal spin :
At fi nal spin, you have high spin after low spin.
By activating F1 during low spin, this low spin will be extended to
15 minutes
unless the START button (S) is pressed earlier.
If the 15 minutes of low spin have been completed, the high spin is
automa-
tically canceled.
By activating F1 after the preprogrammed low spin, you will have a maximum
of
14 minutes
of high spin unless the START button (S) is pressed earlier.
Adjustable stop time
:
Here you can program a certain stop time. The display shows the countdown
of this extra time. When this time is expired, the function will appear auto-
matically and the program will continue.
Select F1 (see above).
The stop time can be programmed by means of the ECO button (E). By pres-
sing it once, the stop time is programmed for 10 minutes. From now onwards,
“
F1
” and “10” appear
by turns
on
the middle displa
y.
By pressing the ECO button (E) once more, you
add
each time 10 minutes.
After 50 minutes, 1.0, 1.1, 1.2, etc... appear with a maximum of 4.0 hours.
By means of the START button (S), you can each time
reduce
10 minutes.
Description of the functions
Remark :
The programmed stop time is executed after the decimal point in the right
display has extinguished.
The stop time cannot be programmed during spin.
Function F2 (soak)
This function can only be chosen during prewash, main wash and fi rst rinse.
The
cycle time is stopped
. The bath is fi lled till
high water level
and heated up
to 40 °C (if a higher temperature was programmed, this will be followed).
As long as this temperature is not reached, the machine makes a
reduced wash
action
( shorter action time and longer pause time). When the bath has reached
its temperature, the drum will make one left/right rotation every
4 minutes
.
Should the temperature fall, the water will be heated again, during which the
action will be reduced again.
This function remains active until the
START button (S) is pressed again
.
Programmable soak time :
In the same way as for the stop time, you can program the soak time (see
programmable stop time).
