IPS TapeShooter 404, Operating Manual

Page: 6 / 7

6
4. Feed stop screw can be loosened to adjust the measuring dial to
necessary length. Upon proper adjustment, tighten feed stop screw.
5. Once tape is properly loaded and the brush and water tank are in place,
you are ready to dispense the tape. With the adjustable feed stop set at
your desired length, simply pull the handle downward and the tape will be
dispensed and cut.
MAINTENANCE
Simple care is required to guarantee quality sealing with your model TS404
Dispenser.
1. Keep brush and water tank clean. Rinse brush and tank in warm soapy
water frequently.
2. Clean knife blade if it becomes coated with adhesive or dirt.
3. For a good appearance and operation, the outside of the dispenser should
be cleaned from time to time using only a mild solution of soap and water.
Never use detergents or abrasives of any kind. Wipe with a clean
cloth.
Adjustable Feed
Stop Screw
Pull handle forward to
dispense and cut tape