
4
Developer options
We mainly use connected USB debugging, other options are for optimizing system.
5
About tablet
Display System updates, status, model number, android version, baseband version, kernel
version, build number.
Status:
Battery status, battery level, network, signal strength, mobile network type, service state,
roaming IMEI, IP address, Wi-Fi MAC address, Bluetooth address, uptime.
7.6 USB data line description
When using USB data line to connect tablet and the computer, tablet interface will jump out the
following interface
:
Only after clicking to turn on the USB storage device can tablet interact with the computer,
otherwise they cannot interact. When you turn on USB storage, the icon will show turn off
USB storage, if you click it again on the tablet will stop interaction.
If the tablet interface does not jump out of the interface or you want to check whether they
have a connection, you can pull out the status bar and click USB has been linked icon in the
notification interface to enter the interface view.
If you need USB mode debugging, you can open tablet Settings>> Developer
options>>Debugging>>USB debugging, and then tablet will connect computer via USB data
line.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.