IPricot Satellite IP Router Reciever IPR-S1000, User Manual, Page: 91 / 108

Share

Page: 91 / 108

IPricot Satellite IP Router Reciever IPR-S1000 User Manual Download Page 91

Configuring the IPR-S1000

86

tftpput:

Allows to put a kernel or a profile on the specified TFTP server.

version:

Displays two version numbers. The first one is the system version, and

the second one is the version of the satellite reception’s software.

trac IP address or «host» name

Prints the route that packets take to reach network host.

numeric:

Prints hop addresses numerically rather than symbolically and

numerically.

timeout:

The process of traceroute will not exceed nsecond.

tos:

Sets the type of service in probe packets to the following value (default

zero). The value must be a decimal integer in the range 0 to 255.

verbose:

Verbose output. Received ICMP packets other than

TIME_EXCEEDED and UNREACHABLEs are listed.

wait:

Sets the time (in seconds) to wait for a response to a probe (default 5

sec.).

tsdump

TS Dump is an MPEG2-TS (Transport Stream) monitoring tool. It can
perform the following tasks:
-Display the selected TS packets in different ways (hexa, hexdump
style...),
-Record the selected TS packets into a file (using the browser or a FTP
server),
-Display statistics of the selected PIDs.

display_dump_date:

If selected, ts dump will display the start and end dates at

the end of the dump.

display_pid_nbr:

If selected, ts dump will display the PID number before each

TS packet.

diplay_pid_rate:

If selected, ts dump will display each PIDs bit rate at the end

of the dump.

display_pkt_count:

If selected, ts dump will display the number of TS packets

received for each PID at the end of the dump.

display_which_bytes:

The number of displayed octets for each packet.

display_which_pkts:

The interveal of packages between two postings.

ftp_addr:

Access parameters to FTP server which will store TS flow.

ftp_login:

Access parameters to FTP server which will store TS flow.

ftp_passwd:

Access parameters to FTP server which will store TS flow.

ftp_path:

Access parameters to FTP server which will store TS flow.

ftp_port:

Access parameters to FTP server which will store TS flow.

mode_ftp:

Selects the FTP analysis mode.

mode_hexa:

Screen select mode (hexadecimal format).

mode_hexaline:

Screen select mode (hexaline format).

mode_hexdump:

Screen select mode (hexdump format).

mod_stat:

Displays statistics only, not packages.

«
...
89
90
91
92
93
...
»

Summary of Contents for Satellite IP Router Reciever IPR-S1000













































































































Reviews:

No comments