iPOWER TPD-800A Quick Installation Guide
3.
Device connection:
a. Single device connection: Single device must be set as the Master. Connect the NET port of device to PC
by network cable.
b. Multiple device connection: Multiple devices can take the daisy-chain style by setting one of them as the
Master and others as slaves. One Master can daisy-chain nine slaves at most. Please see the specific
connecting ways as illustrated in figure 1 and figure 2:
Figure 1 Hand by hand
Figure 2 Through HUB
Ⅱ
.
Software Configuration & User login
Opening IE browser (support IE 6.0, 7.0 and 8.0 versions; other browsers except IE are not available
currently). Default IP address is 192.168.1.163 and default Login Name is "adm", Password is "adm" . Please
note that the login name and password are all Lower-case letter. Please see details as following:
1. M/S
：
Master or Slave status
2. RUN
：
Operating state indicator
3. RESET
：
to set the device as Master or Save, reset button.
4. NET: 10-100Mbps Ethernet RJ45 Connector, to connect to RJ45 port of PC, HUB,
router, switch etc.
5. SER: for daisy-chain
6. LINK: when daisy-chain TPD-800A, connect with the SER port of the next TPD-800A
