background image

6/26/13

setup.html

file:///C:/Documents and Settings/og/My Documents/My Pictures/gimbal/setup/setup.html

2/4

   

2. Fitting should be loose You will tighten after adjusting the parts to level "using a level" in X and Y axis. After you find the level point hold it and
tighten the 25mm clamps till joint no longer moves. All Joints must be level on there own plane.

Set up for use:
1. Find the center of gravity
Move the camera tray assembly to the center of the frame , attach camera. 
Move rear tray assembly left to right until is balanced (not tilted toward the ground left or right on the Roll Axis) not touching the ground on either
end of the camera tray. when you're happy tighten the clamps on rear Roll assembly.

Summary of Contents for GBM5208-150

Page 1: ...e multi rotor that will lift 25lb an more 1 3 x 5208 motor that will lift up to 10lb 2 Bearings on all 3 Axes Pitch Yaw Roll 3 Gimbal 60 degree on Roll axis left right can be modified 4 Gimbal 360 degree on Pitch axis left up down 5 Gimbal 360 degree on Yaw axis around 6 Landing gear with motor cage in the Center hub including barins fit 5208 5206 motor 7 Compatible with all 2 Axis 3 Axis Brushles...

Page 2: ...it and tighten the 25mm clamps till joint no longer moves All Joints must be level on there own plane Set up for use 1 Find the center of gravity Move the camera tray assembly to the center of the frame attach camera Move rear tray assembly left to right until is balanced not tilted toward the ground left or right on the Roll Axis not touching the ground on either end of the camera tray when you r...

Page 3: ...orward or backward in its tray until it is balanced with the tilt Axis at 90 degrees or as much as possible when you re happy tighten the clamps on Tilt Axis assembly camera tray 3 Balancing the camera Tilt Your Camera should be balanced it should not tilt left or right up or down when you position the camera in it s tray Connecting the controllers ...

Page 4: ...Debug software and firmware download http code google com p brushless gimbal downloads list 3 USB computer driver download http www ftdichip com Drivers VCP htm 4 The motor information http www simplebgc com electronics motor_rewind 5 Detailed information please understand the website http code google com p brushless gimbal Martinez Manual http mymobilemms com Martinez Manual pdf EvvGC 3 2axis Bru...

Reviews: