IPN W970, Operation Manual

Page: 10 / 18

10
3.1.3 Making an outgoing call in USB/PC mode
• Ensure that the ‘PC’ button on the top of the headset base is selected.
• Lift the headset from the base or press the headset’s ON/OFF button if you are already
wearing it and the base ‘Online Indicator’ LED will light.
• After finishing your VOIP call, press the ON/OFF button to disconnect. The base
‘Online Indicator’ LED will turn off.
3.2 Adjusting the ringing volume
When the headset is ringing to indicate an incoming call, you can adjust the ring volume
with the volume control buttons located on the headset.
3.3 Muting the headset microphone
To mute the headset microphone when on a call, press the mute button on the headset.
While the headset is in mute mode, a short beep will be heard on the headset every 8
seconds. Press the mute button again to release the mute.
3.4 Headset transmitting volume setting
You can adjust the transmit volume of the headset by using the two buttons
located on the bottom of the headset base.
3.5 Adjusting headset receive volume
Use the volume control buttons on the headset to adjust the receive volume of your head -
set. You will hear a beep sound for each volume step up or down.