IPmitter Wireless Distribution
xIPMIT10
0
AP Mode
This is used to add wireless networking to a network without wireless or to add wireless
networking outside the range of your existing wireless. It requires a wired connection to the
existing network.
Adding WiFi to your network
Super WDS Mode
This is used for point to point connection and will work as one-to-one or many-to-one. You can pair
a maximum of 4 clients to one host. This can be set up without the use of a computer using the LED
display.
One – One
Many – One
Email: [email protected]
Last Revised 30/01/2018
Page
8
of
32