11
arrow to select
“WRITE ADDRESS”
.
As shown in the figure:
9.2. Press
“
SET
”
to enter the address mode interface, as shown in the figure:
①. START CH:
Starting channel
（
The starting address is set in the range of
0-512, and the regular is 001.
）
②. CH MODE:
Interval channel
（
Interval channel setting in the range of 0-255
）
③.
IC :
Chip model
（
Refer to DMX512 IC list
）
④. CONTR NUM
Controller number
(ALL controllers/ Single controller number
01-60)
⑤. PORT NUM:
Address writing port
Refer to the port code list
（
ALL ports/single port 1-8
）
⑥. RETURN
return to main interface
9.3. Press the
“
MODE
”
button to move the arrows, and press
“
SPEED+
”
and
“
SPEED-
”
to set
the start channel/interval channel/IC option/select the address controller/select the address
port.
1.DMX512 IC list
UCS512A*/B*,TM512AL1/AB WS2821
DMX512AP
UCS512C*
，
TM512AC*
SM1651*-3
SM1651*-4
UCS512D*/TM512AD
*
UCS512-E
SM17512*
SM17522*
UCS512-F
TM512AC*
GS8512
SM17500
2. Controller port code list
1
Port OUT1
5
Port OUT5
2
Port OUT2
6
Port OUT6
3
Port OUT3
7
Port OUT7
4
Port OUT4
8
Port OUT8
ALL
All ports OUT1-8
Note: All port addresses of the controller are also supported, and single port
address is also supported.
9.4. Select to complete each item, press
“SET”
to start writing; at this time, the screen displays
“Writing Add...”,
the port indicator flashes, and then
“Writing OK!”
appears to indicate that the
address is completed.
