INSTALLATION (Continued)
Advanced 2/4 Port DisplayPort to 2xHDMI Secure KVM
7
EDID Learn:
The KVM is designed to learn the connected monitor’s EDID upon power up. In the event of connecting
a new monitor to the KVM, a power recycle is required.
The KVM will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port one
green and push button blue LEDs will both begin to flash for about 10 seconds. When the LEDs stop
flashing, the EDID learn process is done.
If the KVM has more than one video board (such as dual-head and quad-head models), then the unit
will continue to learn the EDIDs of the connected monitors and indicate the progress of the process by
flashing the next port selection green and push button blue LEDs respectively.
The monitor must be connected to the video output connector located in the console space at the back
of the KVM during the EDID learn process.
If the read EDID from the connected monitor is identical to the current stored EDID in the KVM then the
EDID learn function will be skipped.
