IPG Interpack USC 2024-BB 3, Operations Manual & Parts List

Page: 36 / 56

USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
Set-Up Procedures
4-11
4.11 T
APE
T
HREADING
P
REPARATION
WARNING: THE KNIFE CONTAINED IN THE TAPE HEAD IS EXTREMELY SHARP.
USE CAUTION WHEN THREADING THE TAPE TO AVOID PERSONAL
INJURY.
Threading the tape in the Tape Head does not require any special tools (refer to Figure 4-13).
Pull approximately 12 in. (304.8mm) of tape from the roll and fold in half lengthwise, adhesive side to adhesive
side. This allows you to thread the tape without it adhering to the guide and clutch rollers inside the Tape Head.
Figure 4-11 Tape Threading Preparation