Connect the vehicle's wiring to the LED bulb's wiring
using commercially available wiring connector.
Commercially available
wiring connector
connect
to ground
OR
LED bulb's
power wire
③
Advice
・
Use water proof connector if you connect
wirings outside of the fog lamp unit.
・
Using non-water proof connectors may corrode
wirings.
Caution
Example of connecting using a connector
Vehicle's fog lamp wiring
・
LED bulb's power wire has no polarity and
AWG20.
・
Use appropriate size of connectors as
thickness of vehicle's fog lamp wiring can differ
between vehicles and fog lamps.
・
Connect to ground if vehicle's fog lamp with no
negative wiring.
Cable ties
Loop
Insert cable ties into the loops and fix them on
the vehicle's harness as shown in the image.
Verify that the LED bulb is secured tightly by
wobbling it. If you removed front bumper or other
parts, reinstall them into original positions.
Vehicle’s harness
Warning
(prevent disconnecting)
Do not tie the harness together with the
drive unit.
Do not bend or pull the harness by
excessive power.
Leave a slack in the harness.
Harness's minimum bend radius
should be more than 20mm
(see the figure right).
More than 20mm
Fog lamp
Minimum
bend radius
Harness should not be tense.
Leave a slack.
