Settings
page
35
9.6.2.4.2
Update Channels
Settings
Device settings
System-Update
Update-Channels
If there is an update either for the internal and external channel (
bigger version
only), it
must be started separately
.
Important:
If the
Reboot system
button appears after the update, it must be pushed to restart the
leakage device.
9.6.2.5
Factory Reset
9.6.2.5.1
Reset to default settings
Settings
Device settings
System
Reset to Defaults
9.6.2.5.2
Unique USB ID
For connections with the PC, a status and therefore a unique USB ID can be defined here.
Relevant for simultaneous connection of several USB devices to the PC.
Update
for Channels
(bigger version)
.
If needed with
„Reboot System“
the
leakage device
could be started
(reboot)
here.
Bevor the settings are changed to the
production default settings a safety prompt
is displayed and must be confirmed by
pressing the button
„Yes“
.
