ipf electronic PRQ80376 Manual Download Page 3

Page: 3 / 4

MANUAL

• Subject to alteration! Version: February 2022

ipf electronic gmbh

│

Rosmarter Allee 14

•

58762 Altena

• Germany

│

Tel +49 2351 9365-0 • [email protected] •

Adjustment

Align the sensor with the reflector so that the light beam impinges at right angles to the reflection plane.

Switching mode

N.O. = normally open
N.C. = normally closed

Setting

The sensor is set via teach-in. You can teach-in via the key or by connecting the white line to L+ instead of pressing the

key.

Standard teach in:

Is suitable for almost any application. The adjustment is made to the reflector and the object.

Step 1: Teach in reflector

Step 2: Teach in object

Press

the key > 3s

until the green and the

Press

key > 1s

yellow LED flash simultaneously. Release
the key, the LEDs flash alternately.

Summary of Contents for PRQ80376

Page 1: ...light pulsed Light spot size see diagram Wavelength 655nm short circuit proof reverse polarity protected Display operation LED green LED 1 Display signal LED yellow LED 2 Material housing Plastic PUR...

Page 2: ...6 May 2019 Attention Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Before commissioning please make sure that...

Page 3: ...tion plane Switching mode N O normally open N C normally closed Setting The sensor is set via teach in You can teach in via the key or by connecting the white line to L instead of pressing the key Sta...

Page 4: ...e running process especially for small objects Step 1 Step 2 Press the key 3s until the green and the Press the key for the duration of one cycle yellow LED flash simultaneously Release the key the LE...