page 14
manual pressure sensor
ipf electronic gmbh
Kalver Str. 25 - 27
58515 Lüdenscheid - Germany
www.ipf-electronic.com
Subject to alteration!
Tel +49 2351 9365-0
Fax +49 2351 9365-19
dAA
dAA
is only active if in
Ou2
an analog signal was set.
Damping the analog output
This function filters peak values of short duration or high fre-
quency.
dAA-value = response time. Period of time between the chang-
ing of the pressure and the analog signal. (unit, seconds).
FOUA
FOUA
is only active if in
OU 2
aog signal was set.
Error
signal of the analog output.
The analog output signal is <3.6mA or >22mA
HI
saving the max. pressure value of the system. The highest value
is displayed.
= delete memory
LO
Saving the min. pressure value of the system. The lowest value
is displayed.
= delete memory.
CYC
counter switching cycles of S!
COF
zero-point calibration
The internal measurand (operating value of the sensor) is offset
compared to the real measurand.
adjustment range: +/-10% of the measuring span.
ddIS
Damping of the display (Peak-Hold-Time)
FdIS
Dislpay functions:
rd
rotate display
Ph
peak-hold. Temporary display of peak values
Rd.
Ph
rotate d peak hold
oFF
standard display
EdA
Error display of the analog output.
(for 4…20mA/ 20…4mA only)
FOUA
dAA
dAA
is only actice if in Ou A an analog signal was set.
Damping the analog output: This function filters peak values of short
duration or high-frequency
dAA-value = response time. Period of time between the changing of the
pressure and the analog signal in seconds.
FOUA
is only active if in
O
u A
an analog signal was set.
Error signal of the analog output
.
The analog output signal is
<3
.
6mA or >22mA
(
for
4-20mA/ 20-4mA
only
)
