MANUAL
– Subject to alteration! Version: August 2022
ipf electronic gmbh
│
Rosmarter Allee 14
-
58762 Altena
-
Germany │ Tel +49 2351 9365
-
0
-
info@ipf-
electronic.com
8
2
General instructions for use
2.1
Scope of delivery
1 x BY000002
SIINEOS Software
1 x instruction manual (PDF)
2.2
General instructions for use
ipf electronic gmbh accepts no liability for malfunctions of the device resulting from
improper handling, mechanical damage, incorrect application and use for other than the
intended purpose. Improper handling of the device can significantly reduce the life of the
product.
2.3
Intended use
The devices are intended exclusively for use in the industrial sector and are used to
monitor machines, systems and processes. Process data can be recorded, processed,
actuated and analyzed with the aid of the connection options provided.
2.4
Safety requirements
The product should be handled in accordance with the DIN standards listed below:
•
DIN EN 61340-5-1:2017-07 Electrostatic properties - Part 5-1: Protection of
electronic components against electrostatic phenomena - General
requirements
•
DIN EN 61010-1:2020-03 Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 1: General requirements
•
DIN EN 60664-1:2008-01 Insulation coordination for equipment within low-
voltage systems - Part 1: Principles, requirements and tests
2.5
Network Security
Please keep in mind that the product does not communicate encrypted within the internal
network. Therefore, protect your network from unauthorized access from the outside!
Special care must be taken when integrating the product into a network with Internet
access. Please consult your system administrator in advance.
