MANUAL
– Subject to alteration! Version: August 2022
ipf electronic gmbh
│
Rosmarter Allee 14
-
58762 Altena
-
Germany │ Tel +49 2351 9365
-
0
-
info@ipf-
electronic.com
20
6.2
Program user software
1.
On your PC, go to the ipf electronik gmbh download area and select
Incore Downloads
> Incore SDK Installer
here to download the Software Development Kit (InCore
Framework).
2.
To install and set up the Software Development Kit and some necessary applications,
please follow the instructions in the download section
> INCORE INSTALL GUIDE.
3.
Once installation and setup are complete, you can program the application
software according to your in-house requirements.
Please refer to the developer documentation. It provides ready-to-use software blocks to
quickly build the IoT/IIoT application:
https://incore.readthedocs.io/en/latest/
4.
Store the finished software bundle locally on your PC in *.raucb format.
6.3
Upload user software to the SIINEOS platform
1.
SIINEOS management console.
2.
Log in with the initial user data (
hubadmin/hubadmin
). The SIINEOS
management console opens.
3.
On the
Updates
page you can upload and install the software bundle in *.raucb format.
The installation is done automatically.
4.
Restart the module.
After the restart you can work with the application software.
Note:
This step is performed by the customer's own software developer.
If you have purchased a ready-programmed user software, we will provide you with the
current version of the user software, see
6.3 Uploading user software to the SIINEOS platform
,
page 19.
Note:
Make sure that the gateway is connected to the PC via a micro USB cable (
USB3-
connector on
the front panel).