ww
w
.ip
el
ec
tr
on
ix
.c
om
IPEX
(IP Electronix)
PH232Ex2
:
User’s Manual
Page 7 of 28
Doc No.: PH232Ex2-UM-001
14 January 2022
8.
GENERAL INDICATORS
POWER LED (Green):
It is turned ON, when the power supply connects to +VDC and GND correctly.
9.
PORT INDICATORS
TCP Server LED (Green):
Blinking this LED shows that the TCP Server mode for this port is selected and
device is trying to connect in this mode. If the device connects to a client, then this LED turns on
continuously.
TCP Client LED (Green):
Blinking this LED shows that the TCP Client mode for this port is selected and
device is trying to connect in this mode. If the device connects to a server, then this LED turns on
continuously.
UDP LED (Green):
Blinking this LED shows that the UDP mode for this port is selected and device is
trying to connect in this mode. If the network works properly, then this LED turns on continuously.
PE LED (Red):
It is blinking if the device detecting a Parity Error in data.
RX LED (Yellow):
It is blinking when the device receive data on serial port.
TX LED (Green):
It is blinking when data is transmitting from the device serial port.
REDIRECT IN (YELLOW):
It is turned on if data from other ports are redirected to this port.
REDIRECT OUT (GREEN):
It is turned on if data from the port are redirected to any other port.
10.
DEVICE POWER SUPPLY
To working properly, you should connect a DC Power Supply to PH232Ex2. The voltage of the Power
Supply should be from +8V to +48V. For example, this device is working with a 12V, +15V or
+24V DC Adaptor
as well.
