Key Definitions
Remote Transmitter
1. Antenna:
Transmits signal from Remote Transmitter to the Collar Receiver.
2. Transmitter Indicator Light:
Flashes green when any of the stimulation buttons
are pressed. Will blink red if battery power is low to indicate the transmitter needs
recharging.
3. Intensity Dial:
Rotate the dial to adjust the level of vibration or static shock
stimulation from 0 to 100.
4. Toggle Switch (Dog Selection):
Switches control between Collar Receiver 1
or Collar Receiver 2 (Dog 1 or Dog 2).
5. Vibration Button:
Delivers vibration to a Collar Receiver, depending on the
position of the Toggle Switch.
6. Stimulation Button:
Delivers electronic pulse stimulation to a Collar Receiver,
depending on the position of the Toggle Switch.
7. Sound Button:
Delivers a sound to a Collar Receiver, depending on the position
of the Toggle Switch.
8. Charging Port:
Charges the battery of the Remote Transmitter when connected
to a power source.
Collar Receiver
1. ON/OFF Button:
Powers on/off the Collar Receiver and used for Pairing or
Synchronization of the Collar Receiver to the Remote Transmitter.
2. Electrodes:
Contact points cover the electrodes, and through them electronic
pulse stimulation is delivered.
3. Charging Port:
Charges the battery of the Collar Receiver when connected to
a power source.
4. Indicating Light:
Flashes green when any of the stimulations are pressed.
Will blink red if the battery power is low to indicate the Collar Receiver needs
recharging.
Operating Guide
Step 1 - Prepare the Remote Transmitter and Receiver Collar:
Charge the Remote Transmitter and Receiver Collar
1. Uncover the Charging Port by lifting the rubber cover.
2. Insert the charging connector into the Charging Port.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Indicator Light, indicating charging
is occurring.
5. Once charging is complete, the solid red light will turn to a solid green
light.
6. Remove the charging connector, and replace the rubber cover to protect
the Charging Port.
Step
1
5
6
Antenna
LED
indicator
Channel
button
Charging
hole
Static
shock
mode
Vibration
mode
Beep
mode
1-100 level
Metal Probes
ON/OFF/Encode
Button
Rubber Cover
Charging Hole