拟制：
校对：
审核：
核准：
About input method seting:
Use the controller to play game should set the phone or notebook input method to be default as English
language input (For the ios system, be sure to switch the input method, and then pairing, if not, the handle does not work properly)
Charging controller:
Accessing the controller to 5V power supply for charging (PC device or mobile phone power adapter). Process of
charging, the charge indicator of the handle is Orange and keep long bright, saturated power LED goes.
Switch on/off the controller
: Press "HOME" button for 3 seconds until the Bluetooth LED is off, that shutdown is successful. If the
phone is not unpair connection when controller shutdown. Just again
Press the "HOME" button for about five seconds, until the LED red light flashes slowly. It means that the handle is turned on (the
default the last boot mode), the boot handle will automatically paired with the phone connection. If the connection fails, the handle
will automatically shut down.
Connect the PC
:
Open the device's Bluetooth PC program, and select the "X, A" in either mode can be paired with(and does not
have a Bluetooth PC devices need to use the Bluetooth receiver).
Note: To change the controller function mode, please turn off the controller firstly and cancel the bluetooth pairing , then in
accordance with the operation mode to replace the code step.
Attention
1. When the controller can't operate normally,Please use the papperclip to touch the reset switch on the left corner of the grip back when the
grip cannot shut down or crash.
2. Please do not put this product in wet or hot place for storage.
3. Do not hit, beat, piercing or attempt to disassemble the product to avoid unnecessary damage.
4. Do not discard
the built-in battery
with garbage.
5. Do not use near fire or other heat source to recharge the battery.
