LDP-9208D/9224D/9224DF/9240D
Quick Guide
6
leaving about 2.5 mm (1/8-inch) exposed.
8.
Align the key holes in the bracket over the screws and slide the phone down assuring the
phone is secure.
9.
Remove, reverse and re-install the handset hook so that the hook catches the groove in the
handset receiver.
10.
Hang the handset up on the handset hook.
11.
Complete all wiring connections as described in “Phone connection”.
NOTE
It may be necessary to remove the phone and tighten or loosen the screws for a
secure mounting.
2.2 DSS (Direct Station Select) Console Installation
A DSS console can be installed with LDP-9200 series phone.
As we described the available DSS for each phone, the available DSS is as below:
LDP-9208D: no DSS
LDP-9224D: LDP-9248DSS
LDP-9224DF: LIP-9012DSS, LIP-9024DSS, and LDP-9248DSS
LDP-9240D: LIP-9012DSS, LIP-9024DSS, and LDP-9248DSS
The DSS console should be installed on the phone prior to making any connections to the phone.
This simplifies the installation.
To install DSS console:
1.
First, assure the phone is NOT connected to
power. For convenience, you may wish to
remove the handset and foot-stand; this
simplifies the Button kit installation.
2.
On the right side of the phone, remove the
Button kit cover.
3.
Align the Button kit and phone as shown in the drawing.
4.
Push the Button kit into the phone until the
button kit is fully engaged.
5.
Insert the screws provided through the screw
tabs in the Button kit and tighten the screws into
the phone. Do not over-tighten.