Copyright © 2007 IPE Music
Page 7
Installation
For optimal performance of the Pod3, please read the following directions carefully before
installation.
Precautions
Connections:
Connect the RCA outputs of your Pod3 to the corresponding computer sound
card, portable music player, or other audio device. We recommend that you use the supplied
cables (or cables of equal or higher quality) for all connections. Be sure that the Pod3 are
powered off before making any connections.
To sync your ipod with your computer, connect the USB cable from the USB port to the USB
port on your computer, AC Power must be off to enable Sync.
Correct Power Operation:
Since the Pod3 contains amplifiers, it must be connected to a
power outlet using the detachable AC cable that is provided. Before connecting power, please
make sure that the On/Off switch to the off position.
WARNING ! – Use of improper Voltage may result in hazardous conditions
and/or damage to speaker components not covered by speaker warranty.
Speaker Wire Connections
Use the 1/8
″
to 1/8
″
mini jack audio cable included in the Pod3 package to connect the left and
right speakers via the 1/8
″
TS mini jacks on the back of each speaker.
