Device Layout and Operation
5
4.
Finishing the installation
Take note of the S/N
, fit the 3 AA batteries noting polarity and plug-in the
connector to the iPdomo Thermostat as in the first picture. Place it forming a 15
degrees angle with the wall mounting plate, like a "V". Adjust it so that the
bottom tab encloses with the device and then fit it using the top tabs. Finally,
switch on the power to your boiler.
Device layout
(#1)
It means the LED is blinking.
(#2)
LEDs are only active momentarily when the unit wakes.
Internal WiFi Antenna
Temperature Sensor
Function Button
MODE LED Indicator:
: Activated
: Deactivated
(#1)
: Asleep
(#2)
Wi-Fi LED Indicator:
: Connected
: Error
(#1)
: No Wi-Fi
Heating LED Indicator:
: On
: Off
Host USB Port
15 º
¡Clic!
Place the wires as
in the picture to
avoid hampering
when adjusting
the device.
S/N
¡Clic!