ipDatatel Gateway 3.0 Rev 1
6
4.
Select your “Controller 1” that was discovered.
5.
When adding a Z-
Wave device select ‘Zwave Add’
6.
Within 5 seconds press the Pair/Mate button on your Z-Wave
device.
a. You should instantly see a device added next to your
Controller 1 device within SecureSmart.
7.
Repeat steps 4-6 for all Z-Wave Products.
8.
Close the Gateway Menu option, you will then have access to all
your Z-Wave devices!
Video Installation
The Gateway 3.0 has a unique way of streaming video to our
customers. There is no need to port forward or set up an external
link to the camera.
We do require the camera to be set up on an
INTERNAL Static IP Address. A non-static IP Address means
that the IP Address would change at some point (seemingly
random) which would undoubtedly result in a service call.
Although this process works with almost any IP Camera with an
API, below is the list of cameras we recommend working with:
•
Axis
•
Foscam
•
Asagio
•
Hikvision
You may be required to call ipDatatel to enable “Widgets” which
allows you to create Camera Icons on SecureSmart. The camera
icon(s) may then be selected (clicked) to view video stream(s).
Once Widgets are enabled, find the section on Alarmdealer.com
on the “Account Contact: View” screen for the particular customer
you wish to add a camera.
The process of adding a Camera Widget is as follows:
1.
Select New Widget
2.
Select Type: Customer Video
3.
Select Enabled: Yes
4.
Enter in the Name of the Camera (Will appear on SecureSmart)
5.
Select the Camera Manufacturer you are using.
