IPCorder KNR-200/202/206
IPCorder KNR-200/202/206
Quick Installation Guide
Quick Installation Guide
•
Connect the device to the computer network and plug it into an electric outlet.
•
On start-up, IPCorder tries to obtain an IP address automatically via DHCP; if unsuccessful, the IP address is
set to the default value
192.168.1.78
. If the IPCorder is in the same subnet as the PC used to access it, it should
appear in the
Network Devices
folder under Microsoft Windows.
•
To obtain the IP address of your IPCorder you can use the
IPCorder Discover
– an application for discovering
IPCorder device in your network. You can find it on the supplied CD or download it directly from
). Windows users can use the file
IPCorderDiscover.exe
for other operation systems
it is the file
IPCorderDiscover.jar
. In order for this utility to function it is necessary to have Java SE 5 or newer
installed.
•
After you start the utility click the
Discover
button and the application will list all IPCorder devices it can access.
In the case the utility fails to find your IPCorder, switch off your local personal firewall and/or antivirus. If
the IPCorder is running in Rescue mode, you can change network settings by the
Device setup
button. For
easier physical localization you can use
Locate
button – red diode (exclamation mark) on IPCorder will start
blinking.
•
Double click the device you wish to setup in the list of discovered devices and the web interface in
Installation & Rescue mode
will launch in your default internet browser. Select
Set up storage,
wait until
2
