Subject to alterations
Version 1.4
IPCOMM GmbH
- 3 -
SEC3x Manual
Walter-Bouhon-Strasse 4
Copyright © IPCOMM GmbH, 2021
90427 Nuremberg
All rights reserved
Germany
1 Introduction
All technical information, descriptions and illustrations contained in this ‘Operating, Maintenance, and
Installation Manual’ remain our property and shall not be used differently than for operating this system,
nor shall they be copied, reproduced or passed on to third parties or brought to their notice without our
prior written consent.
The information represented in this manual is in keeping with current standards and is subject to
subsequent alterations.
This manual contains important instructions referring to safe installation, commissioning, operation, and
maintenance.
Read this manual thoroughly, before starting up the gateway, and observe the instructions.
In order to comply with the guidelines for electro-magnetic compatibility in embedded controllers, only
CE-certified components are used in compliance with project-specific requirements.
Please note that the hardware platform (SEC3x) is not protected against lightning and the operator
should, if desired, take appropriate protective precautions.
The addition of our RS-232 isolator provides efficient protection of your data and equipment against
external influences. We will be pleased to draw up a non-binding offer for you.
Finally we want to draw your attention to the fact that any warranties with respect to the embedded
controller will be invalid in the event that:
Operation, servicing, and maintenance are not carried out accurately according to the
instructions; repairs are not carried out by our personnel or without our prior written consent.
Commissioning is not carried out by our personnel or we have not given our approval for the
commissioning or the commissioning is carried out by untrained personnel.
The unit is used inadequately, incorrectly, negligently, or inappropriately or for a purpose other
than originally intended.
The serial number is removed from the product.
For your protection, observe the following safety precautions when setting up your equipment:
Follow all cautions and instructions marked on the equipment.
Ensure that the voltage and frequency of your power source match the voltage and frequency
inscribed on the equipment's electrical rating label.
Never push objects of any kind through openings in the equipment. Dangerous voltages may
be present. Conductive foreign objects could produce a short circuit that could cause fire,
electric shock, or damage to your equipment.
All trade names or trademarks mentioned in this document are used for identification purposes only and
are property of their respective owners.
