Technisch manual IPC MicroTimer
IPC Systems B.V.
Technisch manual IPC MicroTimer
Pagina 9
Versie 1.3
Ontwikkelingsspecificaties, wijzigingen voorbehouden
Datum 14-03-‘02
2. Operating Manual MicroTimer
®
Contents:
Introduction ...............................................................................
1
MicroTimer specification...........................................................
2
Control diagram.........................................................................
3
Wiring diagram..........................................................................
4
Settings...................................................................................... 5
Electrical specifications.............................................................
5
This document:
This document describes the technical and functional operation of the MicroTimer in the version for
230V mains voltage and 24V low voltage.
The greatest care has been taken with the drafting of the information in this manual and it may be said
that it is reliable. However, the author can accept no liability for any shortcomings in the text or
incompleteness on the information.
We are grateful for your decision to use the MicroTimer.
WARNING!!
Before operation, you have to read the instructions carefully.
Check the 220 V / 240 VAC 50 Hz or 24 VAC / DC power supply before you connect the
machine.
The supplier will not accept liability for damage due to non-observance of the installation
instructions.
Always turn off the power supply, when working on the machine.
The connection has to be made by authorised and well trained staff.
