GB
TECHNICAL INFORMATION
General description
The machine described in this manual is a motorised sweeper designed to sweep floors in civil and
industrial premises.
It may be used to clean the residues of industrial processes, dust and dirt in general on all relatively
even, flat and hard surfaces such as concrete, asphalt, porcelain stoneware, ceramic tiles, sheet
metal, marble, embossed or smooth rubber or plastic mats indoors or outdoors.
Parts of the machine
The machine comprises the main parts described below (fig. 1).
► Debris bin (1, fig. 1). This collects the debris picked up by the main brush and dust from
the filter.
► Control panel (2, fig. 1).
► Main brush (3, fig. 1). This is the most important part of the machine, and transfers dust
and debris to the bin. Brushes are available in different hardnesses and with different bri-
stles to suit the type of material to be picked up.
► Side brushes (4, fig. 1). These convey dust and debris towards the main brush. They only
clean edges, corners and profiles.
► Suction filter (5, fig. 1). This filters the air drawn in by the suction fan.
► Suction fan (6, fig. 1). This enables the machine to sweep without raising dust.
► Flaps (7, fig. 1). These surround the main brush and maintain the suction created by the
fan.
1
2
5
6
3
7
4
1
11
