IPC Gansow TITAN 151BF 87 Translation Of The Original Operating Instructions Download Page 2

 

 

1.  Important warnings 

 
1.1 

Important warning:

  Do not use this appliance without first reading the operating instructions. 

 
1.2  

Important warning:  

This appliance is not suitable for removing dusts hazardous to health.  

 
1.3  

Important warning: 

This appliance is to be used for the wet cleaning of non-textile floors only. 

 
1.4  

Important warning:

  This appliance is not authorised for use outdoors, on public footpaths or on highways. 

 
1.5  

Important warning:

  This appliance may be used on floors with a maximum slope of  8% (valid for Titan 151 

BF) or 12% (valid for Titan 351 BF) only.                             

 
IMPORTANT: 

Before  turning  or  driving  around  corners,  speed  should  be  considerably  reduced.  To  do 
this, simply exert less pressure on the accelerator. 

 
1.6   This  appliance  can  be  switched  on  only  when  the  operator  is  sitting  in  the  driver's  seat.  The  driver's  seat  is 

fitted  with  a  microswitch  which  enables  starting  up  of  all  functions  when  activated  by  the  weight  of  the 
operator.   

 
1.7 

This appliance may be used by fully trained personnel only. 

 
1.8 

In order to prevent unauthorised use of the machine, always remove the key from the key switch. 

 
1.9   When leaving the machine, the operator should apply the parking brake to ensure it cannot move in his 

absence. 

 
1.10  When  using  the  machine,  the  operator  should  take  care  not  to  endanger  any  third  persons,  particularly 

children. 

 
1.11  Before  any  cleaning  or  servicing  work  is  carried  out  on  the  machine  and  before  any  parts  are  replaced,  the 

following precautions must be taken: the machine plug must be removed from the battery socket and the key 
must be removed from the key switch. 
Apply the parking brake whenever work is carried out on the machine. 

 

IMPORTANT: 

Before  changing  the  main  fuse,  it  is  ESSENTIAL  that  the  battery  cabling  is  disconnected 
from the batteries. 

 
1.12  We expressly draw your attention to the fact that original parts and accessories which are not supplied by us 

have neither been tested nor cleared by us.  The installation and/or use of such items may therefore adversely 
affect  the  efficiency  and  characteristics  of  your  floor  cleaning  machine,  jeopardising  its  active  and  passive 
safety. The manufacturer declines all liability for damage occurring as a result of the use of non-original parts 
or accessories. 

 
1.13  Under no circumstances may the charger leads (connecting the charger to the machine) supplied be modified. 

They must under no circumstances be prolonged. 

 
1.14  All  electrical  functions  of  the  machine  are  interrupted  immediately  as  soon  as  the  plug  is  inserted  into  the 

charger socket.  

 
1.15  

Caution:

    This  appliance  may  only  be  used  with  the  brushes  supplied  or  with  the  brushes  listed  in  the 

operating  instructions.    The  safety  of  the  appliance  will  be  jeopardised  by  the  use  of  other 
brushes. 

 
1.16

   Caution:   

Battery gas is highly explosive! Avoid sparks and open fire close to the batteries!

 

 

In order to avoid the build-up of dangerous gas inside the machine, the seat above the battery compartment 
must  be  removed  whilst  charging  is  in  progress.    The  battery  cell  caps  must  also  be  removed  or  at  least 
unscrewed. 

 

Summary of Contents for TITAN 151BF 87











Reviews: