IPC Eagle S6EVO, Operation And Parts Manual, Page: 8 / 14

8
Periodic Maintenance Periodic Maintenance Periodic Maintenance Periodic Maintenance
(Every six to twelve months)
(Every six to twelve months) (Every six to twelve months)
(Every six to twelve months)
1. Check filter for wear, replace dirt saturated filters that do
not respond to normal cleaning.
2. Inspect gasket seals and replace those which have begun to
leak.
3. Examine carbon motor brushes and commutator.
Servicing The Filter Servicing The Filter Servicing The Filter Servicing The Filter
The filter is accessed by lifting the head assembly off the tank.
The Polyester cartridge filter assembly is easily removed by simply prying the cartridge filter off of the support
assembly.
Note:
Note: Note:
Note:
•
Be sure to frequently clean the filters.
•
Allow filters to thoroughly air dry after washing them before returning them to the machine.
•
Worn filters can affect vacuum performance. Replace the filters when they become worn out and normal
cleaning will not restore vacuum performance.
Servicing The Vac Motor Servicing The Vac Motor Servicing The Vac Motor Servicing The Vac Motor
Motor Replacement Motor Replacement Motor Replacement Motor Replacement
1. Disconnect power cord from power source.
2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the
cover to one side.
3. Disconnect the motor’s 2 lead wires from the motor.
4. Remove the three motor mounting screws.
5. Remove motor plate and set aside.
6. Take out the motor and remove the upper and lower gaskets.
7. Inspect gaskets. If they show signs of wear replace them.
8. Install gaskets onto new motor ensuring that they are properly seated.
9. Install the new motor. Make sure foam mufflers are positioned properly.
10. Attach motor plate to motor.
11. Connect motor’s 2 lead wires to motor.
12. Re-assemble vac cover.
13. Test for proper operation.
S853200261.00