IPC Eagle Barrel Vac S9429BV Operation And Parts Manual Download Page 5

IMPORTANT INSTRUCTIONS 

Before use the equipment must be correctly assembled with all of its components

Check that the electrical outlet is correct for use with the plug on the machine

Before connecting, check that the specified motor voltage corresponds to the main
voltage available

Never use the equipment near flammable, explosive or toxic substances: sparks from
the motor could cause dangerous reactions.

Always unplug the machine from the electrical outlet when leaving machine unattended
or before attempting any repair.

Service and repair should be done by qualified personnel only. Use only original
manufacturer’s replacement parts.

Operation 

This machine is a commercial vacuum designed for

 both wet and dry applications

. The  motors can be run 

simultaneously or independently as the job requires. The machine is designed to sit on top of a standard 55 
gallon steel drum.  

Depending on the type of dust and debris being picked up it may be necessary to operate the filter shaker or 
clean the filter before it is time to empty the drum. To clean the filter on the “shake” model, simply push the 
shake rocker switch, this will momentarily stop the vacuum motors and activate the shaker motor. When you 
release the shaker switch the vacuum motors will automatically start back up. For “non-shake” models, turn 
off all of the motor switches and allow the motors to stop running. Remove the motor head from the top of the 
barrel ring, next remove the filter from the barrel ring opening and tap or brush the filter surface clean.   

To extend the life of the filter you may want to occasionally remove the complete filter assembly and wash the 
filter bag. Allow the fabric to dry fully before returning it to the inside of the machine. 

Filtration can also be enhanced by adding one of the various cartridge filters to the bottom of the motor head 
assembly and also by adding one of the Corolon Filters to the outside of the main polyester filter assembly. 
These optional filters can be purchased from your Distributor, the optional filters available are listed below: 

S82852   Cartridge Filter, Paper (will fit S9M429BV & S9M430BV) 
S76061   Cartridge Filter, Polyester (will fit S9M429BV & S9M430BV) 
S82995   Cartridge Filter, Hepa (will fit S9M429BV & S9M430BV) 
S82855   Cartridge Filter Retainer (necessary to use optional cartridge filters on S9M429BV & S9430BV) 
S820237 Cartridge Filter, Polyester (will fit S9M429SBV) 
T80086   Corolon Filter 

Summary of Contents for Barrel Vac S9429BV















Reviews: