4.2 bad and interrupted connection
This may result from these reasons below that you should check
out:
(1) Please make sure the resource signal is strong enough and
both the devices are in good condition.
(2) Frequency interference always exists ,but we could still do
something is to reduce it to the bottom by shutting off some
other unnecessary units around ,or putting the keyboard
closer to the PC or TV box.
(3) Make sure your keyboard are not in low power capacity status
(4) Signal strength may result from some stuffs between the
keyboard and PC, so just put away the suspected stuffs
between each other.
(5) To reduce the frequency interference from the PC itself, you
may plug the USB receiver into the port of an external cable
USB port instead of directly in the PC USB port.
(6) to make sure the keyboard is compatible with the PC by
referring to the system requirement of the keyboard
(7) the signal may be interrupted by uncertain reasons ,you may
pull out the USB receiver or turn off the keyboard to restart the
basic connection from beginning.
(8) The keyboard have an automatic sleep and wake mode to
prolong the standby time, you may click any key to wake it up
before you slide or click on the touchpad
.
.
7
